Rapid-Air CABINET REEL: R50, R60 & R70 SERIES User Manual
Page 2
OPERATING INSTRUCTIONS CABINET REEL
INSTALLATION
1. The machine that you have just received is fully assembled and ready to be put into posi-
tion. Due to shipment vibration the machine should be checked to be sure all screws and
bolts are tight; visually inspect the machine for damage parts due to shipment. If the ma-
chine was damaged in shipment, contact the carrier first to report the damage, and then
Rapid-Air.
2. Install the machine on a level surface with sufficient clearance for loading and unloading
coils.
3. The machine is completely self-contained and need only be plugged into a 20 amp, 120 volt,
60 HZ outlet. If an extension cord is used as the source to the machine, it should be a mini-
mum #12 gauge wire to keep the voltage loss down and for electrical safety reasons.
See Drawing (fig. Man5)
1