Reelcraft Series 80000 Pressure Wash Hose Reel (High Pressure PWxxxxxOHP) - Manual

Personal injury and/or equipment damage
may result if proper safety precautions are
not observed.
• Ensure that reel is properly installed
before connecting input and output
hoses.
• Bleed fluid/gas pressure from system
before servicing reel.
• Before connecting reel to supply line,
ensure that pressure does not exceed
maximum working pressure rating of
reel.
• Remember, even low pressure is very
dangerous and can cause personal in-
jury or death.
• Be aware of machinery and personnel
in work area.
• If a leak occurs in the hose or reel, re-
move system pressure immediately.
• A high tension spring assembly is con-
tained within the reel. Exercise extreme
caution.
• Pull hose from reel by grasping the
hose itself, not the control valve.
• If reel ceases to unwind or rewind,
remove system pressure immediately.
Do not pull or jerk on hose!
• Treat and respect the hose reel as any
other piece of machinery, observing all
common safety practices.
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
[email protected] • www.reelcraft.com
Form# 1239-112 Rev: 3/2012
Dimensional Data
A 24”
B 25.375”
C 5.3125”
D 10.5”
E 10”
F 6”
Personal Safety
IMPORTANT
Read this manual carefully before installing,
operating or servicing this equipment.
Four 1/2” diameter mounting holes
PW81000 OHP
Operating Instructions
Series 80000 Pressure Wash Hose Reel
High Pressure Model Number: