Ross Controls MODULAR WITH INTEGRATED FILTER - Manual (Page 2)

www.rosscontrols.com
New Product
Introduction
FEATURES:
APPLICATIONS:
• Filter and regulator consolidated into a single space-saving
assembly
• Modular mounting for easy servicing
• Internal automatic drain; optional manual drain or float drain
(metal bowl only)
• Reverse flow, self-relieving piston-type regulator; non-
relieving optional
• Tamper-resistant pressure setting
• Has a visible indicator of pressure release (verification port)
• Only lockable in the off position
• Has a full size exhaust port (equal to or larger than supply)
• Easy to operate (positive push/pull operation-detented)
• Optional EEZ-ON ® operation available
Modular L-O-X ®
Air Entry Combination
Lockout Valve with
Integrated Filter/Regulator
STANDARD SPECIFICATIONS
Ambient/Media Temperature:
Plastic or Metal bowl: 40° to 125°F (4° to 52°C).
Body: Zinc.
Bonnet: Acetal.
Bowl: 4-oz (120-ml) polycarbonate plastic with zinc
shatterguard; optional zinc bowl with clear nylon sight glass
6-oz (178-ml).
Bowl Drain: Internal automatic drain; optional manual drain
or float drain (metal bowl only).
Cap Color: Black.
Filter Element: 5-micron rated polyethylene filter element;
optional 40-micron element.
Fluid Media: Compressed air.
Inlet Pressure: 15 psig (1 bar) minimum with automatic drain.
Plastic bowl: 150 psig (10 bar).
Metal bowl: 200 psig (14 bar).
Outlet Pressure: Adjustable up to 150 psig (10 bar); optional
adjusting springs.
Pressure Adjustment: Removable, knob.
Pressure Gauge: 0 to 200 psig (14 bar); 1/4 NPT gauge
ports front and rear; 0-60 psig (4 bar) optional.
Panel Mounting: 1.56 inch (37.1 mm) hole required.
Ports: Tapped inlet, outlet and exhaust ports.
Seals/Elastomers: Carboxylated Nitrile (XNBR).
Valve: Zinc.
Valve Color: Yellow body, red lockout slide.
Slide: Acetal.
Threads: NPT standard, BSPP.
Referenced Standards:
All standards are subject to revision. Parties are
encouraged to investigate and apply the most recent
editions of the standards indicated below.
Lockout/Filter/Regulator
ISO
Symbol
Lockout
Automatic Drain
Self-relieving
OSHA 29 CFR 1910.147
CSA Z142-02
CSA Z460-05
ISO 13849-1
ISO 14118:2000
EN 1037
ANSI/ASSE Z244.1- 2003 (R2010)
ANSI/PMMI B155.1- 2010
GENERAL:
• Packaging
• Conveyor panels
• Material handling
• All Air Entry points
2
1
The Modular L-O-X ® Air Entry is a combination Lockout
Valve with Integrated Filter/Regulator in a high flow,
compact space saving design. Full flow exhaust meets
all the applicable standards.