Maple Systems MAPware-7000 - Manual (Page 253)

MAPware-7000 Programming Manual 253
1010-1040, Rev. 02
+3 Start Date: Hour 0-23
+4 Start Date: Minute 0-59
+5 Start Date: Seconds 0-59
+6 End Date: Day 1-31
+7 End Date: Month 1-12
+8 End Date: Year 0-99
+9 End Date: Hour 0-23
+10 End Date: Minute 0-59
+11 End Date: Seconds 0-59

Group: this is the tag register that the HMC reads to determine
which Data Group to upload. Valid number: 1-4

Start Register For Filename or Filename:
o Select ‘Start Register for Filename’ to reference four
consecutive registers. These registers are interpreted
by the HMC7000 as ASCII characters (two characters per
16-bit register) to create a filename that is used by the
HMC when uploading.
o Select ‘Filename’ to manually enter the name for the
upload file.

StatusRegister: the HMC7000 will use this register to enter a
status code number which can be used to communicate any
errors during upload or status:
Status
Code
Number Description
3 Error: Logger Group Invalid
5 Error: The File Output Device code is invalid
6 Error: The Start/End Data/Time is invalid
51 Error: The USB Flash Drive not detected
52 Error: Get Descriptor Error
53 Error: Set Address Error