Proface FP3900 - 19 Flat Panel" - Manual (Page 9)

Pin
No.
Signal Name Condition Pin Location
1 Analog R R signal input
2 Analog G G signal input
3 Analog B B signal input
4 Reserved NC (spare for input)
5 Digital grounding Digital signal GND
6 Return R R signal GND
7 Return G G signal GND
8 Return B B signal GND
9 Reserved NC (spare for input)
10 Digital grounding Digital signal GND
11 Reserved
NC (spare for input)
12 Reserved NC (spare for input)
13 H. SYNC Horizontal synchronous signal input
14 V. SYNC Vertical synchronous signal input
15 Reserved NC (spare for input)
‹ ‹ ‹ ‹ ‹Pin Assignments and Signal Names for Analog RGB
Connector: Mini Dsub 15 pin male
Connector set screw: Inch type (4-40)
Analog RGB Cable: FP-CV02-45, FP-CV00, FP-CV01 (VGA standard)
(Manufactured by Digital Electronics Corporation of Japan)
If a cable other than the specified Analog RGB cable is used, FP unit
operation cannot be guaranteed due to the possibility of noise
interference.
Size
H Sync.
(kHz)
V Sync.
(Hz)
Dot Clock
(MHz)
Screen Resolution
Expansion
(H: Horizontal)
(V: Vertical)
Display
Resolution
640Ч350
*1 31.469 70.000 25.175 800 Ч 525
640Ч400 31.469 70.000 25.175 800 Ч 600
640Ч400 24.827 56.420 21.053 800 Ч 600
640Ч480 31.469 59.992 25.175 800 Ч 600
640Ч480 35.000 66.670 30.240 800 Ч 600
640Ч480 37.861 72.810 31.500 800 Ч 600
720Ч350
*1,2 31.469 70.000 28.320 720 Ч 525
720Ч400
*1 31.469 70.000 28.320 720 Ч 600
800Ч600 35.156 56.250 36.000 800 Ч 600
800Ч600 37.879 60.317 40.000 800 Ч 600
Ч 1.25 (H)
× 1.5 (V)
× 1.0 (H)
× 1.5 (V)
× 1.25 (H)
× 1.25 (V)
× 1.0
‹ ‹ ‹ ‹ ‹FP2600-T42-24V
* 1 When the 350 pixel (vertical) signal setting is selected, 400 pixels, including 50 pixels at
the top and at the bottom of the screen will be enlarged and displayed at 600 pixels
(1.5times).
* 2 Select "720 x 400 Display Resolution 720 x 400 DSP" in the OSD (On Screen Display)
"System Setting" screen.
11
15
1
5