Watlow Addendum to EZwarePlus - Manual (Page 19)

6) On the Numeric
Format tab.
7) In Data format set
the data type. See the
table.
8) On the Font tab set
Align to Right.
9) Click OK.
(013b)
For this
controller… This
parameter… Enter this
Address*… Choose this
Data Type…
RMCxxxx-xxxxxxx
Closed Loop
Working/Active
Set Point
(Read Only)
2513 32-bit Float
RMHx-xxxx-x1xx 5233 32-bit Float
PMxxxxx-xxxxxxx 2173 32-bit Float
STxx-xxMx-xxxx 204 32-bit Float
ST via RUI Gateway 2173 32-bit Float
Other Controllers Consult the controller manual.
*These addresses have already been changed to the absolute form required
for EZwarePlus by adding 1 to the value listed in the Watlow manual. Enter
them as listed.
10) Move the cursor with
the outline to position
the display field and
click to place it.
11) Adjust the size of the
field as needed.
12) From the File menu
choose Save.
(014)
Silver Series EM OIT  19  Watlow Addendum