Watlow Silver Series Addendum - Manual (Page 28)

Silver Series OIT  28  Watlow Addendum
19) Position the cursor and
click to place the
function key.
20) From the File menu
choose Save.
(032)
Compile and Download the Project
This example assumes you have a project that is ready to compile and load into an OIT.
To compile the project:
1) From the Tools menu,
choose Compile.
2) Click Compile.
3) After the project is
compiled, click Close.
(034)
To download via Ethernet or via a USB cable:
1) If downloading via Ethernet, determine the OIT’s IP address:
• If you don’t already know the OIT’s IP address, follow the instructions in Determining or
Setting the OIT’s IP Address on page 4, note the IP address for use below.
2) If downloading via a USB cable:
• Connect the USB cable to the OIT.
• Apply power to the OIT.