Wright Serial #55142 and higher - Manual (Page 29)

27
12. Attach (1) nylon lanyard to the handle part of each hitch pin. Insert one end of the lanyard through
the retaining washer and attach to hitch pin spring clip to the eye in the lanyard. Install the spring into the
hitch pin. See Figures 4, 5 and 6.
13 Torque 7/16” lower leg mounting hardware to 59 ft-lbs and 3/8” hardware to 37 ft lbs.
Seatbelt Installation
14 Secure retractable seat belt using (2) 7/16-14NC x 1.25” long hex head bolts, (4)7/16” flat washers and
(2) 7/16-14NC nylock hex nuts. See figures 7 and 8.
Fig 4
Fig 5
Fig 6
Fig 7
Fig 8