Yokogawa EJA115 - Manual (Page 44)

IM 01C22T02-01E A-6
APPENDIX 1. LIST OF PARAMETERS FOR EACH BLOCK OF THE EJA
26 2026 – SENSOR_CAL_
WHO Set/indicate the name of the person responsible for the
last sensor calibration. O/S
27 2027 – SECONDARY_
VALUE The secondary value (istatic pressure) of transducer. –
28 2028 MPa SECONDARY_
VALUE_UNIT The engineering unit of secondary value. –
29 2029 – TERTIARY_
VALUE The tertiary value (Temperature) of transducer. –
30 2030 C TERTIARY_
VALUE_UNIT The engineering unit of tertiary value. O/S
31 2031
Trim disable
TRIM_PV_ZERO
Trim disable: Prohibit zero/span calibration
Trim enable: Enable zero/span calibration
Trim data clear: Clear zero/span calibration
O/S
32 2032
0
TRIM_MODE
The trim zero of primary value.
O/S
33 2033 Enable EXT_ZERO_
ENABLE The permission of external SW for trim zero. O/S
34 2034 Model code MODEL The model code. –
35 2035 Specified at the time
of order DISPLAY_MODE The mode of display. 1=Engineering unit, 2=% display,
3=1/10@Engr. Unit, 4=1/100@Engr. Unit, 5=1/1000@Engr.
Unit, 6=1/10000@Engr. Unit, 7=1/1000000@Engr. Unit. O/S
36 2036 1 DISPLAY_CYCLE The cycle of display on LCD. O/S
37 2037 Disable ALARM_SUM The current alert status, unacknowledged status,
unreported status and disabled status of the alarms
associated with the function block. –
38 2038 – TEST_1 Not used for EJA. –
39 2039 – TEST_2 Not used for EJA. –
40 2040 – TEST_3 Not used for EJA. –
41 2041 – TEST_4 Not used for EJA. –
42 2042 – TEST_5 Not used for EJA. –
43 2043 – TEST_6 Not used for EJA. –
44 2044 – TEST_7 Not used for EJA. –
45 2045 – TEST_8 Not used for EJA. –
46 2046 – TEST_9 Not used for EJA. –
47 2047 – TEST_10 Not used for EJA. –
48 2048 – TEST_11 Not used for EJA. –
49 2049 – TEST_12 Not used for EJA. –
50 2050 – TEST_13 Not used for EJA. –
51 2051 – TEST_14 Not used for EJA. –
52 2052 – TEST_15 Not used for EJA. –
53 2053 – TEST_16 Not used for EJA. –
54 2054 – TEST_17 Not used for EJA. –
TA0103-2.EPS
O/S 25 2025 SENSOR_CAL_
DATE – Set/indicate the date of the last sensor calibration.
O/S 24 2024 SENSOR_CAL_
LOC – Set/indicate the location of the last sensor calibration.
23 2023 103: factory trim
standard calibration SENSOR_CAL_
METHOD The method of the last sensor calibration.
100=volumetric
101=static weight
102=dynamic weight
103=factory trim standard calibration
104=user trim standard calibration
105=factory trim special calibration
106=user trim special calibration
255=others
O/S
22 2022 Serial No. SENSOR_SN Serial number. –
Relative
Index
Index Explanation Write Mode Factory Default Parameter Name