Yokogawa FlowNavigator Software - Manual (Page 4)

<A1. Header>
4
IM 01C25R51-10E
3. Installation Flow
Followings are the flow of standard installation. As the procedures may differ according to the condition, please find details in
each designated manual and follow the instructions.
Step 1
Confirm incompatible software does not exist, PRM and FSA210 (Refer to < Document No.2>)
Step 2
Install communication device software (For F
OUNDATION
fieldbus communication)
Step 3 Install FieldMate (Refer to <Document No.1>)
1) Install FieldMate <Disc No.1 >
2) Enter the license number of FieldMate <License Sheet No.1 >
3) Install Device Files <Disc No.2 >
Step 4
Install FlowNavigator <Disc No.3 >
Step 5
Start FieldMate
1) Register yourself in FieldMate (Refer to <Document No.1>)
2) Start Device DTM
Step 6
Start FlowNavigator Program
1) Enter the license number of FlowNavigator <License Sheet No.2 >
4. Important Notice on Flow Configuration Wizard
● Supplemental explanation regarding Apply button
When you click the Apply button, the flow parameters are temporarily saved to an offline database on your PC. To down-
load the flow parameters to the device, set “Download to Device” in the Offline Parameter screen.
For basic information on the procedure for downloading flow parameters to the device, refer to Appendix A.
● Supplemental explanation for EJX910A/EJX930A HART 7 model
Flow parameter configuration by FlowNavigator can be done by “EJX910 V2.1” DTM.
Refer to Appendix B.