Yokogawa FlowNavigator Software - Manual (Page 8)

<A1. Header>
8
IM 01C25R51-10E
Appendix B Flow configuration for EJX910A/EJX930A
HART 7 model
Flow configuration for EJX910A/EJX930A HART 7 model is shown below.
Open Segment Viewer on FieldMate.
A device icon appears on the window if it is successful to connect to FieldMate.
Figure B-1 Segment Viewer
Select the icon of the target device.
Click the [Action] → [Select DTM]
Select “EJX910 V2.1” DTM and click OK.
Figure B-2 Select “EJX910 V2.1” DTM
For the following operations, perform in the same procedure as the flow configuration for EJX910A/EJX930A HART 5 model.