Cfield diagnostics on profibus devices c-1 outline – Yokogawa FieldMate User Manual
Page 17
C-1
IM 01R01A15-01EN
2nd Edition : 2013.11.07-00
C
Field Diagnostics on PROFIBUS
Devices
C-1
Outline
The NE 107 alarms have been categorized in the PROFIBUS protocol, which means
that these categories cannot be changed. Therefore, Alarm Mapping and Masking
cannot be set for PROFIBUS devices and only the results are displayed (the Device
Status Display only). Follow the instructions of next section to operate the Device Status
Display.
■ Starting Up Field Diagnostics (NE 107) for PROFIBUS Devices
There are two ways to open the Device Status Display: from the toolbar menu (see
Section A-4
“Starting Up Field Diagnostics from FieldMate”), and from the Device Status
menu in the navigation area (see Figure C-1-1).
Figure C-1-1 Start-up menu in the Field Diagnostics Navigation area