Yokogawa FieldMate - Manual (Page 8)

B-2
IM 01R01A15-01EN 2nd Edition : 2013.11.07-00
B-2 Operation
B-2-1 Field Diagnostic Status Display
Start up the Field Diagnostic Status function from the FieldMate menu as follows.
1. Select Field Diagnostic Status in the menu of Additional Functions (see Figure A-4-
1). The Field Diagnostic Status Display appears.
2. Check “Not Categorized,” “Grayed out items,” or “Normal” in the View area to select
alarms to be displayed in the Diagnostic List area. The selected alarms are all
assigned to any of the 32 aggregated field diagnostic alarms. The first layer
displays aggregated field diagnostic alarms and the second layer displays
extended field diagnostic alarms, which are related to the aggregated field
diagnostic alarms in the first layer. The extended field diagnostic alarms can be
shown or hidden according to the setting of respective alarms or masking.
Not Categorized: Among the alarms in the first layer, alarms which are set to “Not
Categorized ” are displayed or hidden (aggregated field diagnostic alarms which are
set to “Not Assigned” in the Quick Configuration Display).
Grayed out items: Among the alarms in the second layer, alarms which are
masked are displayed or hidden (grayed out alarms with “Escalation Enable” being
OFF in the Extended Configuration Display).
Normal: Among the alarms in the first layer, alarms which are set to “Normal” are
displayed or hidden. When there are no alarms occurring, “No Alarms” is displayed
in the Diagnostic List area.
Figure B-2-1 Field Diagnostic Status Display