A-4 starting up field diagnostics from fieldmate – Yokogawa FieldMate User Manual
Page 6
A-4
IM 01R01A15-01EN
2nd Edition : 2013.11.07-00
A-4
Starting Up Field Diagnostics from
FieldMate
Follow the procedures below to start up Field Diagnostics from FieldMate.
1. Start up DTM Works for a connected device. For details, see Section E-3-2
“DTM
Works
” in FieldMate Versatile Device Management Wizard (IM 01R01A01-01E).
2. Select
“Device” → “Additional Functions” in the toolbar menu.
3. Select a function of Field Diagnostics.
Field Diagnostic Status:
Starts up the Field Diagnostic Status Display.
Field Diagnostic Online Setting:
Starts up the Field Diagnostic Online Setting Display.
Field Diagnostic Setting Offline Edit:
Starts up the Field Diagnostic Setting Offline Edit Display.
Figure A-4-1 Menu for Field Diagnostics in DTM Works