Yokogawa HART Communicator YHC5150X - Manual (Page 13)

13
Figure 2-5 Confirmation dialog for selection
1. If “Create new device maintenance information” is selected
When [OK] is clicked, new device maintenance information is created based on the device ID of
the device configuration file, and DTM data is saved.
2. If “Use the existing device maintenance information” is selected
Device maintenance information with a blank device ID is displayed in the list.
When device maintenance information is selected in the list and [OK] is clicked, the device ID of
the device configuration file is used as the device ID of the selected device maintenance
information, and DTM data is saved.
When the [Skip] button is clicked, transfer of the device configuration file is skipped.
2.4.3. Confirmation Dialog for Overwriting Data
This dialog is displayed when the following conditions are met before saving DTM data in the device
maintenance information.
 There are five pieces of DTM data of the device maintenance information to be saved.
Figure 2-6 Confirmation dialog for overwriting DTM data
When data to be overwritten is selected and [OK] is clicked, the DTM data is overwritten and saved.
When the [Skip] button is clicked, the process is skipped.
①
②