Yokogawa HART Communicator YHC5150X - Manual (Page 9)

9
2. Converting Device Configuration Files
2.1. Saving Data in Device Maintenance Information (possible only in FieldMate Advance)
On the window for selecting device configuration files, select Device Maintenance Information as the
saving destination, choose the files to be saved, and then press the [Next] button. This moves to the
confirmation window shown below.
Figure 2-1 Window for confirming device configuration files
(to save files in device maintenance information)
Table 2-1 Window for confirming device configuration files
(to save files in device maintenance information)
No. Name Specifications
1 Device Setting File List Displays a list of selected device configuration
files. For details, see Section 2.3.
2 Checkbox for Creating Automatic
Device Maintenance Information Specifies whether to create the target device
maintenance information automatically if it does
not exist in FieldMate.
3 Progress Bar Displays the progress of the conversion process.
4 Back Button Returns to the previous window.
5 Send Button Starts the conversion process and saves the data
in the device maintenance information.
Confirm the device configuration files to be saved and click the [Send] button to start the conversion.
Once started, the device configuration files are automatically converted into DTM data and saved in
the device maintenance information except for some specific conditions.
In the case of specific conditions, a confirmation dialog appears.
For specific conditions and respective confirmation dialogs, see Section 2.4.