Yokogawa Removable Chassis DX1000N - Manual (Page 18)

16
IM 04L41B01-02E
Run Modes
Hold down FUNC
for 3 s or
Basic Setting Mode
> DISP/ENTER
(release number 3
or later)
End menu > DISP/ENTER or
ESC > DISP/ENTER
(release number 3 or later)
Power ON
Operation mode
Mode Transition Diagram
Basic setting mode Setting mode
Operation display
MENU key
MENU key
or ESC key
Setting menu
display
Setup display
MENU key
or ESC key
DISP/ENTER
key
Basic setting
menu display
Setup display
DISP/ENTER
key
ESC key
On a DX with advanced security
(/AS1 option; release number 4 or later):
MENU key or ESC key > DISP/ENTER
or
End menu > DISP/ENTER
The DX has three modes.
Mode Description
Operation mode A mode for performing measurements.
Setting mode A mode in which input range, measurement method, and so on
are configured. Settings can be changed when memory sampling
is in progress excluding some items.
Basic setting mode A mode used to set basic items such as the scan interval and
storage format of measured data. On a DX with advanced
security (/AS1 option; release number 4 or later), the login
settings can be changed during memory sampling.
* For further details on the basic setting mode and setting mode, see page 63.
Carry out the steps given in the following pages. It will help you to understand the DX
operation.
Basic Operation