Yokogawa Removable Chassis DX1000N - Manual (Page 7)


IM 04L41B01-02E
• Copying the software for any purposes other than backup is
strictly prohibited.
• Please store the original media containing the software in a safe
place.
• Reverse engineering, such as decompiling of the software, is
strictly prohibited.
• No portion of the software supplied by YOKOGAWA may be
transferred, exchanged, or sublet or leased for use by any third
party without prior permission by YOKOGAWA.
Handling Precautions of the DX
• Use care when cleaning this instrument, especially its plastic
parts. Use a soft dry cloth. Do not use organic solvents, such
as benzene or thinner, or other cleansers. They may cause
discoloring and deformation.
• Keep electrically charged objects away from the signal terminals.
If you do, the DX may malfunction.
• Do not apply volatile chemicals to the display, panel keys, etc.
Do not allow rubber and vinyl products to remain in contact
with the DX for long periods of time. If you do, the DX may
malfunction.
• When not in use, make sure to turn OFF the power switch.
• If there are any symptoms of trouble such as strange odors or
smoke coming from the DX, immediately turn OFF the power
switch and the power supply source. Then, contact your nearest
YOKOGAWA dealer.
Handling Precautions of the External Storage
Medium (CF Card)
• Use caution in the handling of the external storage medium as it
is a delicate product.
• Write operation to storage media may fail under high-
temperature or low-temperature environments. If you are using
the DX in a low-temperature environment (around 10 °C or
less), use the DX after the warm-up time (at least 30 minutes)
has elapsed. If you are using the DX under a high-temperature
environment (around 40 °C or more), it is recommended that the
external storage medium be inserted into the drive when saving
the data and be removed after the data storage operation is
finished.
• Remove the storage medium from the drive when turning the DX
ON/OFF.
• Touching the compact flash section when static electricity is built
up on the human body can lead to erroneous operation.
• For the general handling precautions of the external storage
medium, see the instruction manual that came with the external
storage medium.
CAUTION
• Do not eject the external storage medium while the access
indicator is illuminated. This can damage the data.
• Do not access the storage medium in a place with vibrations or
shock. The storage medium or drive may malfunction.
Checking the Contents of the Package
Unpack the box and check the contents before operating the
instrument. If some of the contents are not correct or missing or
if there is physical damage, contact the dealer from which you
purchased them.
DX
A name plate is located on the top panel of the DX (side panel on
models with the /H5[ ] option). Check that the model name and
suffix code given on the name plate match those on your order.
name plate
DISP/ ENTER
6 9 7 8 10 11
12
1 2 3 4 5
100-240V AC 50/60Hz 100V A MAX N L MODEL
FREQUENCY
NO.
SUFFIX
SUPPLY
STYLE
H S
NO. (Instrument Number)
When contacting the dealer from which you purchased the
instrument, please give them the instrument number.
MODEL and SUFFIX Cod
-3
-4
-1
-2
Model code Suffix code Optional
code
Description
Daqstation DX1000 2ch, 125ms (25ms *12 )
Daqstation DX1000 4ch, 125ms (25ms *12 )
Daqstation DX1000 6ch, 1s (125ms *12 )
Daqstation DX1000 12ch, 1s (125ms *12 )
Daqstation DX1000N 2ch, 125ms (25ms *12 )
Daqstation DX1000N 4ch, 125ms (25ms *12 )
Daqstation DX1000N 6ch, 1s (125ms *12 )
Daqstation DX1000N 12ch, 1s (125ms *12 )
Standard Memory (400 MB)
CF card (with medium)
English/German/French, deg F, and DST
(English version of DAQSTANDARD included)
DX1002
DX1004
DX1006
DX1012
DX1002N
*11
DX1004N *11
DX1006N *11
DX1012N *11
Internal memory
size
External storage medium
Language
Options /A1 Alarm output 2 points *1
/A2 Alarm output 4 points *1
/A3 Alarm output 6 points *1*2
/C2 RS-232 interface *3
/C3 RS-422/485 interface *3
/F1 FAIL/Status output *2
/H2 Clamped input terminal (detachable)
/H5[ ] Desktop type *4
/M1 Mathmatical functions
/N1 Cu10, Cu25 RTD input/3 leg isolated RTD
/N2 3 leg isolated RTD *5
/N3 Extended input type (PR40-20, JPt50, etc.)
/P1 24 VDC/AC power supply *4
/R1 Remote control
/TPS2 24VDC transmitter power supply (2 loops) *6
/TPS4 24VDC transmitter power supply (4 loops) *7
/KB1 Easy text entry (with input terminal) *8*9
/KB2 Easy text entry (without input terminal) *8
/USB1 USB interface
/PM1
Pulse input (including remote control and mathmatical functions) *10
/CC1 Calibration correction function
/BT2 Multi batch function * 12
/CP1 PROFIBUS-DP *3
/AS1 Advanced security function
*1 /A1, /A2, /A3 cannot be specified together.
*2 /A3 and /F1 cannot be specified together.
*3 /C2, /C3, and /CP1 cannot be specified together.
*4 /H5[ ] can be specified for only DX1002, DX1004, DX1006, and DX1012.
D: Power cord UL, CSA st’d
F: Power cord VDE st’d
R: Power cord AS st’d
J: Power cord BS st’d
H: Power cord GB st’d
Null (/H5): Only for /P1 model (without power cord)
*5 /N2 can be specified for only DX1006, DX1006N, DX1012, and DX1012N.
*6 In case that /TPS2 is specified, /TPS4, /A2, /A3, or /F1 cannot be specified
together.
*7 In case that /TPS4 is specified, /TPS2, /A1, /A2, /A3, or /F1 cannot be
specified together.
*8 /KB1 and /KB2 cannot be specified together.
*9 In case that /KB1 is specified, remote input terminal (438227) is included.
*10 In case that /PM1 is specified, /A3, /M1, /R1, /TPS2, or /TPS4 cannot be
specified. And combination of /A2, /F1 cannot be specified together.
*11 DX1002N, DX1004N, DX1006N, and DX1012N are Pull Out Models.
*12 /BT2 can only be specified for the DX1006, DX1006N, DX1012, and DX1012N.