Yokogawa Removable Chassis DX1000N - Manual (Page 43)

41
IM 04L41B01-02E
Operation
Writing the Message “START”
Registering the Word “START” in Message Number 1
On a DX with advanced security (/AS1 option; release number 4 or later), this operation
is only available when memory sampling is stopped.
1. Press MENU (to switch to setting mode) > select the Menu tab > Message,
Comment > Message > DISP/ENTER .
2. Press the 1-10 soft key.
The message, “Message numbers 1-10 can also be used for free message” appears. Press
DISP/ENTER.
3. Press the down arrow key. With message 1 selected, press the Input soft key.
Enter “START”.
Show the message registration window.
Select the input position: Left and right arrow soft keys
Enter characters: Arrow keys and DISP/ENTER
Delete a character: Use the arrow keys to select Del and press DISP/ENTER , or
press the Bs soft key .
Enter the input: Use the arrow keys to select ENT and press DISP/ENTER .
Cancel the setting: Press ESC before pressing DISP/ENTER .
For the input procedure, see “Entering Values and Characters” on page 17.
4. Press DISP/ENTER.
. Press ESC three times or MENU twice to return to the operation mode screen.
On a DX with advanced security (/AS1 option; release number 4 or later):
Press ESC three times or MENU twice to display a confirmation screen. To return
to the operation mode screen, select Yes, and press DISP/ENTER once.
Operation complete.