Yokogawa Button Operated DX2000 User Manual
Page 21
20
4.5.2. Setting the Channel Display of the Current Value Mark
1. Press
MENU
(switch to the setting mode).
2. Hold
down
FUNC
for 3 s to switch to the basic setting mode.
3. Select
Environment
> AUX.
4. Set
item
1
under AUX to On (two digits, special setting) or Off (three digits,
standard setting).
Setup Screen Example for the Channel Display of the Current Value Mark
(DX1000(N) Example)
Table 4-5 Setting the Channel Display of the Current Value Mark
AUX Setting
Selectable Items
(Selectable Range)
Description
1
On/Off
Channel display of the current value mark
Off:
Three digits (standard setting)
On:
Two digits (Special setting)
2 On/Off
Not
used
3 On/Off
Not
used
4 On/Off
Not
used
4.5.3. Communication
Commands
WU p1,p2,p3,p4,p5 <terminator>
¾
p1: Setup
type
(AUX)
¾
p2: Channel display of the current value mark (On: two digits, Off: three
digits)
¾
p3: Not
used
(On/Off)
¾
p4: Not
used
(On/Off)
¾
p5: Not
used
(On/Off)