Yokogawa Removable Chassis DX1000N - Manual (Page 53)

2-14
IM 04L41B01-01E
• Dealing with the "Invalid User" Status
If a user enters the wrong password and presses DISP/ENTER consecutively for the
specified number of times (the password retry frequency), that user is invalidated and
can no longer log in. The user-locked icon appears in the status area.
User locked icon
Clearing the User-Locked Icon (Only administrators can perform this
operation)
1. Log in as an administrator.
2. Press FUNC.
The FUNC key menu appears.
3. Press the Locked ACK soft key.
The user-locked icon is cleared.
Note
The Locked ACK soft key appears when a user is invalidated.
Releasing the Invalid User Status and Logging in as an Invalidated User
1. An administrator has to set the invalidated user’s password to its default. For the
setup procedure, see section 2.1.
2. The invalidated user must then follow the procedure under “Logging In Before the
Password Has Been Set” to log in.
Note
If all the registered administrators are invalidated, administrators will no longer be able to log
in (registered users can still log in).
Be sure to manage the passwords to prevent this from happening. If you become unable to
log in as an administrator, contact your nearest Yokogawa dealer.
2.2 Logging In and Out