Yokogawa Button Operated MV2000 - Manual (Page 88)

4-36
IM 04L47B01-01EN
4.10 Data Prntng
Prnter settng
Procedure
1. Select Fle > Prnt Settngs from the menu bar.
The “Print Settings” dialog box is displayed.
2. Set the items by selecting from the list box or by input into a text box.
Explanaton
The active screen (waveform display screen, alarm list, mark/message list) is printed.
The display of alarm lists and mark/message lists is switched by tabs, and the displayed
list is printed.
The print setting items and the contents are as shown below.
Settng tem Contents
Range All, cursor range
Color Color
Group View group (fixed)
Span All data/1 page, 1 hour/1 span, 8 hours/1 page, 12 hours/1 page
Hour/page When selecting Set freely for [Span], you can set the print span per
page.
Waveform thickness 0.25 pt, 0.5 pt, 1.0 pt, 1.5 pt, 3.0 pt
Printing comment Input is possible for up to 250 single-byte characters (printing is done
to the upper part of the waveform print).
Note
• In case of printing onto multiple pages by print span setting, the cursor values and the
calculation results are also printed from the second page on.
• Depending on the number of Y-axes and the size of the printing paper, waveforms may not
be printed.
Prntng the waveform dsplay screen
The waveform display screen can be printed only when the waveform display screen is
active. When the same screen has 10 or more Y-axes in case of waveform printing, the
axes from the tenth one on are not printed.
When the cursor values and the calculation results reach one half of the height of the
printing paper, the cursor values and the calculation results are not printed on the same
page as the waveform, but on a different page.
If the displayed waveform is a single continuous data, headers are added. For
information on header information, see “Headers when printing” in this section.