Selecting the displayed language – Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 10
10
IM 04L31A01-05E
Event Output Setting in Program Control Related Setup Operations
If you set [Event Output] to [Separate], select the pattern number in the [Pattern No.] list
box. For a description of the setup parameters of event output setting, follow the
explanations in “Event Output Setting (PV event-relay output/Time event-relay output/
Program pattern end signal)” in section 3.6, “Program Control Related Setup Operations”
in the
DAQSTANDARD User’s Manual (IM 04L31A01-61E)
.
Click [Event disp] to show the settings of event display group.
When the event output setting is [Separate], select the pattern number.
(Cannot be selected when the event output setting is [Common].)
Set the event display group.
Selecting the Displayed Language
You can select Chinese as the displayed language.
Click here. (Or choose the [Setting] menu > [SETUP [Basic] Setting] > [Setting].)
You can select [Chinese].
Operations on the DAQSTANDARD