Yokogawa Button Operated MV2000 - Manual (Page 30)

Press T/DIV
Change the display-data save settings
1. Select the Trend/Storage interval.
Press the 1min soft key.
2. Select the Save interval.
Press the 1h soft key.
Note
This screen does not appear with the default settings. In A/D,
Memory in Basic setting mode, set the data type to E+D
Press T/DIV.
Change the event data display settings.
1. Select the Sample rate.
Press the 1s soft key.
3. Select the Data length.
Press the 1h soft key.
2. Select the recording Mode.
Press the Free soft key.
Press T/DIV.
Return to the Quick settings screen.
You have finished configuring the MV.
Quick Settings
31 M-4661