Yokogawa Button Operated MV2000 - Manual (Page 48)

Communication > POP3 Details
Setting Selectable Range or Choices Default Value
POP3 Details
Send delay [second] 0 to 10 s 2
POP3 Login PLAIN/APOP PLAIN
Math
Setting Selectable Range or Choices Default Value
Math
Value on Error +Over/-Over +Over
Value on Overflow > SUM, AVE Error/Skip/Limit Skip
Value on Overflow > MAX, MIN, P-P Over/Skip Over
Report
Setting Selectable Range or Choices Default Value
Report
Report select > 1 Max/Min/Ave/Sum/Inst Ave
Report select > 2 Off/Max/Min/Ave/Sum/Inst Max
Report select > 3 Off/Max/Min/Ave/Sum/Inst Min
Report select > 4 Off/Max/Min/Ave/Sum/Inst Sum
File type Separate/Combine Separate
End
Setting Selectable Range or Choices Default Value
Do you want to store and make the new
settings take effect? Yes/No/Cancel —
Menu Tab
Alarm > Basic settings
Setting Selectable Range or Choices Default Value
Basic setting
Reflash On/Off Off
Rate of change > Decrease 1 to 32 1
Rate of change > Increase 1 to 32 1
Indicator Hold/Nonhold Nonhold
Alarm > Switch, Relay
Setting Selectable Range or Choices Default Value
Internal Switch
AND None/S01/S01-S02/…/S01-S29/S01-S30 None
Relay
AND None/I01/I01-I02/…/I01-I06 None
Action Energize/De-energize Energize
Hold Hold/Nonhold Nonhold
Relay Action on ACK Normal/Reset Normal
Alarm > Hysteresis
Setting Selectable Range or Choices Default Value
Hysteresis
Meas CH > High/Low Numeric value (0.0 to 5.0) 0.5
Meas CH > Delta High/Low Numeric value (0.0 to 5.0) 0.0
Math CH > High/Low Numeric value (0.0 to 5.0) 0.0
Default RD-MV1000 Settings
49 M-4661