Yokogawa Standalone MW100 User Manual
Page 18
Advertising
18
IM CA150E
When prompted, name the driver – in this case MW100 was used but the name can be changed to suit different naming conven-
tions.
Path name for Ethernet Device
After the driver is named, enter the IP address of the MW100 and click OK to continue.
Confi guring IP Address of MW100 within RSLinx
®
When properly confi gured there should be a new listing in RSLinx
®
for MW100. Note that when browsing the connection,
RSLinx
®
indicates the node is found.
RSLinx
®
with MW100 added
Note, EDS (Electronic Datasheet) and ICO fi les are available for integration purposes.
Advertising