Yokogawa Standalone MW100 - Manual (Page 11)

11
2.2. Serial Communication Settings
Enter serial communication settings to configure the MX118.
1. Choose Communication > Settings.
Or, click the Communication Settings icon on the toolbar.
2. Select the port to be used.
3. Select a baud rate of 9600 bps or 57600 bps.
4. Click
the
OK
button to enter the settings.
Explanation
Port
Enter the communication port of the PC connected to the MX118.
Baud Rate (bps)
Enter the speed for serial communications used to configure the MX118.
Enter a baud rate corresponding to the dip switch setting on the front of the MX118.
or
Click here
Baud Rate
Port