Acquisition interval and retry settings, Acquisition interval and retry settings -5, Index – Yokogawa DAQWORX User Manual
Page 14: Acquston interval and retry settngs
2-5
IM WX1-08E
1
2
3
Index
Operat
ng Procedure
Test Executon
6.
Click the Test Start button in the Tag Setting dialog box.
The test result is displayed in the Value column, and the current values can be
monitored.
Stoppng the Test Executon
7.
Click the Test Stop button.
Acquston Interval and Retry Settngs
Procedure
1.
Click the Scan Interval Settng tab or choose Vew > Scan Interval Settng from
the menu bar.
The Scan Interval Settng tab is displayed.
Settng the Acquston Interval
2.
Enter a setting within the following range into the Acquisition Interval box.
Setting range: 0.5 to 3600 seconds, initial value: 1 second
Retry Settngs
3.
Turn the communication retry setting ON (blue) or OFF (gray).
4.
Enter a retry interval from the following range to be used when retrying
communication.
Setting range: 30 to 3600 seconds, initial value: 30 second
2.2 Enterng Envronment Settngs