5 displaying the execution status and reconnecting, Displaying the connection status, Displaying the connection status -9 – Yokogawa DAQWORX User Manual
Page 18: 5 dsplayng the executon status and reconnectng, Index, Dsplayng the connecton status
2-9
IM WX1-08E
1
2
3
Index
Operat
ng Procedure
2.5
Dsplayng the Executon Status and
Reconnectng
Procedure
Dsplayng the Connecton Status
1.
Click the Montor/Status tab or choose Vew > Montor/Status from the menu
bar.
The Monitor/Status tab is displayed, showing which recorder is connected and
with which PC.
Displays the names of connected clients
Indicator for the communication
status with the connected device
Green: Normal (comm. open)
Red: Communication error
Yellow: Data lost, other
(communication paused)
No display: Communication error
(comm. paused)
Double-click to display the Error
Indicator dialog box
Vewng Error Detal
2.
Double-click Status under Communication Status on the Montor/Status tab.
The Error Message dialog box opens.
See section 3.3 for error messages.
Note
Click the Start button to download data from the connected devices. The interval at which data
is acquired is determined by the acquisition interval on the Acquisition Setting tab. If Retry is
turned OFF and a connected device experiences an error while running, data acquisition stops
on the next interval. To restart acquisition, reconnect using the procedure below.