Yokogawa DR240 - Manual

Notice of Alterations
Yokogawa Electric Corporation
User’s
Manual
Please note the following(underlined) alterations to the IMDR232-01E.
Page 3 “Main Unit DR232/DR242”
Model Suffix Code Description
·············· ······························································
Power Cord D···················· 3-pin inlet w/UL, CSA cable* (Part No. A1074WD)
F···················· 3-pin inlet w/VDE cable* (Part No. A1009WD)
R···················· 3-pin inlet w/AS cable* (Part No. A1024WD)
S···················· 3-pin inlet w/BS cable* (Part No. A1023WD)
H···················· 3-pin inlet w/GB cable* (complies with the CCC)(Part No. A1064WD)
W···················· 3-pin inlet with screw conversion terminal**
······························································
Page 3 “Subunit DS400/DS600”
Model Suffix Code Description
·············· ······························································
Power Cord D···················· 3-pin inlet w/UL, CSA cable (Part No. A1074WD)
F···················· 3-pin inlet w/VDE cable (Part No. A1009WD)
R···················· 3-pin inlet w/AS cable (Part No. A1024WD)
S···················· 3-pin inlet w/BS cable (Part No. A1023WD)
H···················· 3-pin inlet w/GB cable (complies with the CCC)(Part No. A1064WD)
W···················· 3-pin inlet with screw conversion terminal (when power supply suffix code is -1)
······························································
Page 5 “Standard Accessories”
1. One of these power cord types is supplied according
to the instrument's suffix code
F D S R H
The “7. Clamp filter (Part No. A1197MN)” is not supplied.
Page 7 “Safety Precautions”
The following caution has been added.
CAUTION
This instrument is a Class A product. Operation of this instrument in a residential area may cause
radio interference, in which case the user is required to take appropriate measures to correct the
interference.
Page 2-14 “HOLD/NON-HOLD Setting”
You can select whether to hold the operating status of operated internal switches or alarm output
relays. This setting applies to both the internal switches and the alarm output relays.
However, non-hold always applies to relays for which the reflash alarm is set, regardless of the hold/non-hold
setting.
DR232/DR242
Hybrid Recorder
(Expandable Type)
IM DR232-01E-9A 1/5
for IM DR232-01E 9th Edition