Yokogawa DAQWORX - Manual (Page 28)

3-5 IM WX1-05E
1
2
3
Index
Deta
led Descr
pt
on Funct
ons
Tag Name
Enter a tag name as needed. You can enter up to 16 alphanumeric characters. Tags
can be downloaded (tag data is received) using a DAGLOGGER tag software or Remote
Monitor that is connected to GateMODBUS.
Unt
Enter a unit as needed. You can enter up to 6 alphanumeric characters. The unit string
is the unit string on the DAQLOGGER or Remote Monitor connected to GateMODBUS.
Decmal Place
Enter a decimal place of 0, 1, 2, 3, or 4. This value is the decimal place used when
DAQLOGGER or Remote Monitor is connected to Gate-MODBUS for monitoring.
Upper/Lower Lmt of Span
Enter the upper and lower limit values of span. The available setting range is as follows:
Decmal Place Settng Range
0 –10000000000000000 to 10000000000000000
1 –1000000000000000.0 to 1000000000000000.0
2 –100000000000000.00 to 100000000000000.00
3 –10000000000000.000 to 10000000000000.000
4 –1000000000000.0000 to 1000000000000.0000
This value is the default setting used when DAQLOGGER or Remote Monitor is
connected to GateMODBUS for monitoring.
Groups
You can combine tags into groups. Up to 50 groups can be created. Up to 32 tags can
be assigned to a group. The following items are included in group settings.
• Tag assignments: Up to 32 tags can be assigned to a group.
• Color of assigned tags: The default color when connected to Remote Monitor.
• Group name: Up to 30 alphanumeric characters can be input.
Note
Group settings cannot be used by DAQLOGGER. They are only available when connected
to Remote Monitor.
Tag Assgnments
Tags can be assigned to groups. Up to 32 tags can be assigned to a group. The
tags assigned here are the default values when Remote Monitor is connected to
GateMODBUS.
Tag Colors
Specify colors for tags assigned to groups. The tag colors specified here are the default
values when Remote Monitor is connected to GateMODBUS.
3.2 Detaled Descrpton of Functons