Ameriphone IIIP TTY User Manual
Page 10
1.
Turn on the TTY.
2.
Hold down and press
2
to select
the memo function.
3.
Type in the name of your greeting mes-
sage; , for example. Press
to save memo name.
4.
Type in your message. For example,
.
5.
Hold down and press
to save.
6.
Hold down and press
7
to select
setup option.
7.
Press
two times until
appears on your
screen. Type in the name of your new
greeting. For example,
.
The screen now reads
.
Press to save.
8.
Hold down and press
to return to normal TTY operation.
CHAPTER 5
(CONTINUED)
D. Personalized Greeting Message (optional)
F. Setting Up Other Operating Options
(optional)
DIALOGUE III/III-P can print conversations in
three letter sizes; standard, medium, and big. It
is preset to print in standard letter size. Howev-
er, once it is changed it will remember and main-
tain the size selection.
1.
To change to big size, hold down
and press
B
.
2.
To change to medium, hold down
and press
M
.
3.
To change back to normal, press the
same keys.
You can verify your selection by checking the
print on the paper tape.
1. Printer Letter Sizes
GREETING
GREET MEM> HELLO
GREETING
HI, THIS IS JOHN, GA.
GREET MEM> GREETING
ANSWER
E. Personalized Outgoing Message
for Auto Answer (optional)
WE ARE NOT AVAILABLE, PLS LEAVE A MSG. GA .
2. Screen Display Direction
3. Tone/Pulse Dialing
Your TTY is preset to tone dialing. If tone dialing
is not available from your telephone company,
you can change it to pulse dialing. If changed,
the mode of dialing is set unless you change it
again.
1.
Hold down and press
7
.
EDIT RELAY NBR? Y/N
appears on the
screen.
2.
Press
repeatedly until
USING TONE DIAL? Y/N
appears on the
screen.
3.
Press
N
to change to pulse.
4.
Hold down
and press
to return to normal TTY operation.
To change the mode of display from right-to-
left to left-to-right:
1.
Hold down
and press
7
.
EDIT RELAY NBR? Y/N
appears on the
screen.
2.
Press
repeatedly until
DISPL RT TO LFT? Y/N
appears on the
screen.
3.
Press
N
to change. Once changed, the
TTY will continue to display in this mode
until it is changed again.
4.
Hold down
and press
to return to normal TTY operation.
1.
Turn on the TTY.
2.
Hold down and press
2
to select
the memo function.
3.
Type in the name of your outgoing mes-
sage; , for example.
Press to save the memo name .
4.
Type in your message. For example,
5.
Hold down and press
6.
Hold down and press
7
to select
the setup option.
7.
Press three times until
appears on
your screen.
8.
Type in the name of your new outgoing
message; for example:
The screen now reads
(or the name you
have typed). Press
to save.
9.
Hold down and press
to return to normal TTY operation.
ANSWER
OUTMSG MEM>AUTO ANS
OUTMSG MEM>ANSWR
8