Ameriphone IIIP TTY - Manual (Page 26)

PHYSICAL DIMENSIONS
Size: 10–1/4" x 12" x 3"
Weight: 3 lbs.; 4.25 lbs. (with printer)
POWER
AC adapter: 9VDC, 650 ma (min), UL/CSA
listed Rechargeable batteries: Six NiCad size
AA Powers unit for approximately 1 hour
KEYBOARD
4 row keyboard
51 ergonometric keys
DISPLAY
Blue/Green vacuum fluorescent
20 characters; 0.25" (6mm) character height
ACOUSTIC COUPLERS
Accepts both circular and square telephone
handsets
COMMUNICATION CODES
Baudot Code: 45.5 or 50 Baud
Sensitivity=67 dBSPL (min)
PRINTER (DIALOGUE III–P)
24–character thermal printer
Uses 2–1/4" (58mm) thermal paper
CSA/NRTL LISTED
FCC AND DOC APPROVED
CHAPTER 15
SPECIFICATIONS CHAPTER 14
FCC REGISTRATION
This TTY complies with the standards in part 68
of the Federal Communications Commission
(FCC) rules and has been approved by the FCC
for direct connection to telephone lines. The
Registration Number and Ringer Equivalence
Number (REN) are noted on the label at the bot-
tom of the unit.
Before connecting the unit to your phone line,
notify your local telephone company of the
Federal Communications Commission (FCC)
Registration Number and the Ringer Equivalence
Number (REN) of your TTY.
Your local telephone company is required by the
FCC to allow you to connect FCC registered tele-
phone equipment to their telephone lines. Your
notification helps your local telephone company to
continue to provide the best possible service.
Your AMERIPHONE product has also been tested
and found to meet the standards for a Class B
digital device, as specified in Part 15 of the FCC
Rules. These specifications are designed to pro-
vide against interference to radio and television
reception in a residential installation. However,
there is no guarantee that interference will not
occur in a particular installation. If your AMERI-
PHONE product causes interference to radio or
television reception when in use, you might cor-
rect that interference with any one or all of these
measures:
1. Where it can be done safely, reorient the
receiving television or radio antenna.
2. To the extent possible, relocate the televi-
sion, radio or other receiver with respect
to the telephone equipment.
3. If your telephone product runs on AC
power, plug it into an AC outlet that’s not
on the same circuit as the one used by
your radio or television.
24