Spin-on filter replacement – MAHLE RTI ACF-3000 User Manual
Page 8
Advertising

Spin-on Filter Replacement
RTI Part Number: 026 80253 00
NOTE:
A spin-on filter (WIX
®
33343 or equivalent) should be replaced after each flushing
procedure. RTI is not responsible for damages caused by use of non-equivalent
spin-on filters!
1. Locate the spin-on filter on the rear of the ACF-3000.
2. Turn the filter counter-clockwise to remove.
3. Apply a small amount of lubricant to the filter gasket and install the new filter. Take
caution to hand tighten only.
*Follow your local state, municipal or federal waste management authority or
recycler to dispose the used flushing solvent and filters.
7
Loosen
Advertising