MAHLE RTI BFX-2 - Manual (Page 6)

Page 5
N E W T A N K = # # O Z
S E L E C T P R O C E S S
N E W T A N K = # # O Z
E M P T Y I N G M C
N E W T A N K = # # O Z
S E L E C T P R O C E S S
N E W T A N K E M P T Y
S C A N N E W B O T T L E
I N S T A L L B O T T L E
P R E S S > C O N T I N U E <
R E M A I N I N G = # # O Z
F I L L I N G M C
³ This will display.
Press EMPTY MASTER CYLINDER.
³ This will display.
Use Vacuum Hose to remove all fluid from the
master cylinder.
Press EMPTY MASTER CYLINDER to end the
process.
IMPORTANT: Place end of Vacuum Hose on
Parking Stud before proceeding to next step.
³ This will display.
Connect Fill Gun to Fill Hose.
Press FILL MASTER CYLINDER.
Buzzer will beep three times.
³ This will display.
Swipe bar code on new bottle of Valvoline
Brake Fluid. Each bottle can only be scanned
once (the BFX records the bar code number
and will prevent a second scan). Buzzer will
beep once when valid bar code is read by
scanner.
³ This will display.
Install New Fluid Float Switch in bottle of brake
fluid.
Press CONTINUE.
³ This will display.
Place nozzle of Fill Gun into the Master
Cylinder and squeeze trigger. Remaining
ounces will be displayed.
Release trigger when master cylinder is filled to
proper level.
Press FILL MASTER CYLINDER to stop the
process.
Hold Fill Gun over Master Cylinder and
squeeze trigger to relieve pressure.
Replace Master Cylinder cap and disconnect
Fill Gun.