Stuart Turner Flomate Mains Boost - Manual (Page 9)

- 9 -
b) Blue wire must be connected to the terminal which is marked with the letter ‘N’
or coloured black.
c) Brown wire must be connected to the terminal which is marked with the letter
‘L’ or coloured red.
3.21 Wiring Diagram:
The supply cord and internal wiring within the terminal box are
routed and secured to ensure compliance with the electrical
standard EN 60335-1. Do not disturb the internal wiring or factory
routing and securing of all internal wiring.
Model Fuse Size (AMPS)
All Models 5
3.22 Fuse:
Fig. 4
MAIN WINDING
THERMOTRIP
CAPACITOR
START WINDING
FLOWSWITCH
REED (S3)
BLU
E
BROWN BLACK
RED
GREEN/YELLOW
BLUE
BROWN
L
M A
N
N
S2 S3 S3 S2
L
E
N
S1 S1
230 VAC/1PH/50Hz
SUPPLY