Stuart Turner PH 35 ES B - Manual (Page 4)

- 4 -
Cont ...
Notes:
Max. viscosity: 9.5 centistokes (Redwood No 1 scale).
Max. ambient air temp: 40°C
*
With footvalve fitted.
** Max working pressure is the maximum pressure that can be applied to the pump
internal casing under any installation conditions.
*** Maximum permissible liquid temperature 65°C.
**** The supply voltage must not exceed ±10% of the above listed
voltage. eg. 230 ±10% Failure to adhere will damage the unit.
TECHNICAL SPECIFICATION
Note: For information on other voltages/frequencies which are not shown, consult any
supplementary instruction sheet supplied, or the rating label attached to the
pump.
Stuart Turner reserve the right to amend the specification in line with its policy of
continuous development of its products.
LIMITS OF APPLICATION
Model Supply
(Note ****)
Max.
Liquid
Temp.
o C
(Note ***)
Min.
Liquid
Temp.
o C
Max.
Suction
Lift (m)
(Note *)
Max. No.
Starts/h
Cut in
Pressure
(bar)
Cut Out
Flow
(l/min)
Max.
Working
Pressure
kPa (bar)
(Note **)
Max.
Inlet
Head
(m)
Max.
Head
(m)
(pump
closed
valve)
PH 35 ES B 230/1/50 65 4 4.6 60 1.4 1.0 600 (6) 13 29.5
PH 45 ES B 230/1/50 65 4 4.6 60 1.4 1.0 600 (6) 13 41.0
K7-2 230/1/50 65 4 4.6 60 0.8 1.0 600 (6) 8 13.5
Model Supply
Max. Watts
Consumed
Nominal
Watts
Output
(Motor)
Full
Load
Current
(AMPS)
Enc.
Rating
Duty
Rating
Dims (mm)
Gross
Weight
(packed)
kg
No. of
Pump
Stages
L W H
PH 35 ES B 230/1/50 380 120 1.6 IPX4
Continuous (S1) @
4.5 l/min and above
241 130 287 7.0 1
PH 45 ES B 230/1/50 540 300 2.4 IPX4
Continuous (S1) @
4.5 l/min and above
270 130 287 8.5 1
K7-2 230/1/50 450 360 2.0 IPX4 Continuous (S1) 242 159 302 8.9 1