5 geo s12 analogue tdcontroller, 1 specifications, 2 front and rear panel view – Nexo RS User Manual

Page 53

Advertising
background image

RS15

T

ECHNICAL

S

PECIFICATIONS

Page

53/58

10.5 GEO S12 Analogue TDController

10.5.1 Specifications

SPECIFICATIONS

Output Section

+22 /+16/+10 dBm typ. into 600 Ohm load. Back Panel switch on +6/0/-6dB respectively.

Input Section

Maximum input Level : 22dBu. CMRR 80dB @ 1kHz typ.

THD+N

0.1% @ 1kHz Typ. for +10dBm Output

Noisefloor

S12TD -100 dBV for 0dB switch position (22 Hz - 22 kHz, Unweighted)

Dynamic Range

111 dB Unweighted (THD+N at-60dBr sine wave @1kHz rel.max. output)

Crosstalk 104dB
Filtering & EQ.

L&R: 12dB/oct Low Pass, 12dB/oct High pass (crossover or overlap), 4 Parameter EQs.
All factory defined

Protections

VCA temp. (SUB,LF & LF), VCEQ disp. (SUB & LF), Peak Limiter (all chanels), Power
compression regulation

Power Supply

100-250 Volts (continuous operation), 50/60Hz. Power 9W. Peak Inrush current 0.5A.
Earth-Lift.

Conformity

Comply with safety objective of 73/23/EEC & 89/336/EEC directives. (EN60065-12/2001,
EN55103-1996).
CB scheme DK-8371, cULus 60065 AZSQ E241312, FCC part15 class B

PRODUCT FEATURES

Audio Inputs

Two differential non floating L&R Audio inputs, 50 kOhm. Two XLR-3F connectors.

Sense Inputs

Three Amplifier Sense Inputs (S12 L&R, LS). 400 kOhm. 6 Pole Removable Strip
Terminal

Audio Outputs

Two L&R S12 Audio outputs. Balanced, non floating, 51 Ohm. Two XLR-3M.
One Mono (L+R) LS400 Audio output. Balanced, non floating, 51 Ohm. One XLR-3M.

Controls

Gain switch (back panel), 3 positions : -6 / 0 /+6dB.
Peak Limiter trimmer (1200W-600W/8 Ohms) for S12 & Subbass
Sub Overlap / Crossover switch & Sub Gain Control (-/+ 6dB).

Indicators

LF speakers Protect Yellow LED's (Temp. & Disp), Power ON (green), Amp Sense &
Peak LED's (green/Red)

Dimensions

1U 19" Rack. 165mm (6.5") Depth

Weight :

2.9 kg (6.6 lbs) net

SYSTEM OPERATION

Applicable Products

The S12 TDcontroller is precisely matched to the S12 & associated Subbass and includes
sophisticated protection systems. Use of either product without a properly connected
Controller will result in poor sound quality and may damage the components.

SubBass

Active two-way operation of the S12 Loudspeaker with the associated Subwoofer is
included in the Analogue S12 TDcontroller .

10.5.2 Front and Rear Panel view

BALANCED INPUTS

RIGHT

LEFT

RIGHT

LEFT

SUB L+R

OUPUT

LEVEL

+6dB

0dB

-6dB

BALANCED OUTPUTS

EARTH

LIFT

115 - 230V 50 - 60Hz 10W

CAUTION !

To reduce the risk of electric schock

grounding of the center pin

of this plug must be maintained.

MADE IN FRANCE

+ RIGHT -

+ LEFT -

+ SUB -

SENSE INPUT

(from amp terminals)

CAUTION !

Sense line must be connected

for speaker protection.

10CE

PS8 TDcontroller

s.n

:

03105

4004

Advertising
This manual is related to the following products: