ReadyLIFT Ford F350 Super Duty SST Lift Kit: 2011-2014, 4WD Only - 3.5F/1.0"R - Stage 4" - Manual (Page 7)

For the final step: Reinstall the OE radius
arm mounting bolt and torque to spec with
the vehicle on the ground allowing the sus-
pension to adjust and notify the alignment
tech. Recheck all work performed before and
after test drive.
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (69-2011, 2511, 2511TP, 2531, 2537, 2538)
For radius arm bracket option on 3.5 lift kit unplug ABS line. Support radius arm and remove attachment bolts
Carefully lower arm enough to slide drop bracket into frame. Align bracket with holes in frame and raise arm into bracket.
Insert crush sleeves and new hardware into drop bracket. Tighten hardware and leave OE bolt loose until on ground.