ReadyLIFT Ford F250 Super Duty SST Lift Kit: 2005-2007, 4WD Only - 2.5/2.0"R" User Manual
Page 3
ReadyLift® (Part# 69-2517CP & 69-2518CP)
Installation Instructions
2005-UP Ford F-250 Super Duty 4WD w/Camper Package
ReadyLift®
2060 Placentia Ave Suite B-1, Costa Mesa, CA 92627
T o l l F r e e ( 8 0 0 ) 5 4 9 - 4 6 2 0 L o ca l ( 9 4 9 ) 5 1 5 - 0 7 9 5 F a x ( 9 4 9 )5 1 5 -0 6 5 5
Please read instructions thoroughly and completely before beginning installation.
Installation by a trained mechanic is highly recommended.
Position truck on a flat surface and lift vehicle by the frame until the front wheels are off
the ground. Use a floor jack and support the frame with jack stands, or a (2) two post
lift if available. Two jacks may be needed to lift and lower the front differential during
installation.
5.
4.
3.
2.
1.
Remove front wheels. Remove the lower
shock bolt. Use a floor jack to raise the dif-
ferential to release any pressure on the
lower shock bolt making the removal easier.
Remove this bolt.
With the jack still supporting the axle, unbolt
the 13mm brake line support bracket from
the frame on both sides.
2005-2007
Fig A
2008
Fig B
Remove upper track bar 30mm nut and
bolt.
Remove sway bar end link bolt on both
sides. 19mm, 21mm
Fig A
Fig B
Lower differential and remove spring.
Install Readylift® coil spacer.
(Order of assembly: Coil (
A
), factory isola-
tor (
B
), coil spacer (
C
), polyurethane sound
insulator (
D
).) Reinstall coil and raise differ-
ential.
A
B
D
C
Install shock extension onto shock using the
hardware provided.
Please note that there is a
driver and passenger side shock extension.
Look for the D and P stamped on the inside
leg of the brackets.
Install shock extension
bracket into factory shock mounting location on
the axle using the factory hardware. Torque to
factory specs. Reference torque specs on front
page.
Remove this bolt.