Acer Altos G5350 Series - Manual (Page 103)

93
Chipset Configuration
The Chipset Configuration submenu lets you set the memory interleave
and node interleave settings.
Parameter Description Option
DRAM Bank
Interleave
Bank Interleave allows the memory
controller to group two DIMM banks
into one large array.
If set to Auto, each node with two
identical DIMMs is set up to use bank
interleave.
Auto
Disabled
Node Memory
Interleave Node based interleaving causes the
system to group even numbers of nodes
into one large array.
If set to Auto and if all loaded nodes
have the same amount of memory, the
system is setup to use node interleave.
Disabled
Auto