ReadyLIFT GMC Sierra 1500 2WD Long Travel Front Suspension Kit - 2007-2013 - Manual (Page 11)

Please note the following options:
The spindle to LCA can be performed
either with the hub installed first to the
spindle or after the spindle is partially
fitted to the LCA. Access to the top
hub bolt and the spindle attachment
design are the determining factors.
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (49-3004)
Separate OE spindle from hub assembly, reuse OE hardware
Attach loosely with provided hardware, (do not tighten here) Attach hub to spindle using OE bolts
Torque hub bolts to spec at this time Now tighten LCA/spindle hardware to spec.
Insert spindle/UCA misalignment spacers Attach spindle to UCA using provided hardware