Mammoth 5 to 40 Tons: Water-to-Water (K-Vintage) - Manual (Page 5)

5
MAMM-WSHP-IOM-1KA (September 2011)
Unit Location
Locate the unit in an area that allows for easy removal
of the compressor and control box access panels. The
diagram below shows minimum suggested clearances.
Any additional clearances would be beneficial, but not
always necessary.
The requirements on any specific unit may increase or
be reduced depending on several factors such as
maintenance requirements and mechanical or electrical
installation codes.
The electrical connections are accessible from the
front. The compressor can be accessed from either
side.
There are no air filter, ductwork or ventilation air
requirements for K-Vintage water-to-water units.
Service Clearances