Point-to-point configuration, Same point-to-point 802.1x configuration – Brocade FastIron Ethernet Switch Security Configuration Guide User Manual
Page 211
Advertising
Point-to-point configuration
The following figure illustrates a sample 802.1X configuration with Clients connected to three ports on
the Brocade device. In a point-to-point configuration, only one 802.1X Client can be connected to each
port.
FIGURE 6 Sample point-to-point 802.1X configuration
Same point-to-point 802.1x configuration
The following commands configure the Brocade device in the Sample point-to-point 802.1X
configuration figure.
device(config)#aaa authentication dot1x default radius
device(config)#radius-server host 192.168.9.22 auth-port 1812 acct-port 1813
Point-to-point configuration
FastIron Ethernet Switch Security Configuration Guide
211
53-1003088-03
Advertising