Brocade FastIron Ethernet Switch Security Configuration Guide - Manual (Page 310)

Deleting a web authentication VLAN
To delete a Web Authentication VLAN, enter the following commands:
device(config)# vlan 10
device(config-vlan-10)# no webauth
Syntax: [no] webauth
Web authentication pages
There are several pages that can be displayed for Web Authentication.
When a user first enters a valid URL address on the Web browser, the browser is redirected to the
Web Authentication URL (refer to
Defining the web authorization redirect address on page 309).
If Automatic Authentication is enabled, a Welcome page appears. The browser will then be directed to
the requested URL.
If username and password (Local User Database) authentication is enabled, the following Login page
appears.
FIGURE 15 Example of a login page when automatic authentication is disabled and local user
database is enabled
The user enters a user name and password, which are then sent for authentication.
If passcode authentication is enabled, the following Login page appears.
Deleting a web authentication VLAN
310 FastIron Ethernet Switch Security Configuration Guide
53-1003088-03