Brocade FastIron Ethernet Switch Security Configuration Guide - Manual (Page 366)

Brocade(config)# prefix-list raguard-prefix-list1 permit 2001:db8::/16
Brocade(config)# ipv6 raguard policy policyB
Brocade(ipv6-RAG-policy policyB)# whitelist 1
Brocade(ipv6-RAG-policy policyB)# prefix-list raguard-prefix-list1
Brocade(ipv6-RAG-policy policyB)# exit
Brocade(config)# interface ethernet 1/1/2
Brocade(config-int-e1000-1/1/2)# raguard untrust
Brocade(config-int-e1000-1/1/2)# exit
Brocade(config)# ipv6 raguard vlan 2 policyB
Example: Verifying the RA guard configuration
To view the RA guard packet counts, use the show ipv6 raguard counts command.
Brocade# show ipv6 raguard counts policyB
DROPPED-host port:0
DROPPED-whitelist:3
DROPPED-prefixlist:1
DROPPED-max pref:1
DROPPED-trusted port:2
DROPPED-untrusted port:1
To verify the RA guard configuration, use the show ipv6 raguard command.
Brocade# show ipv6 raguard all
policy:policyC
whitelist:0
max_pref:medium
policy:policyB
whitelist:1
Example: Verifying the RA guard configuration
366 FastIron Ethernet Switch Security Configuration Guide
53-1003088-03