Brocade VDX 8770-8 Hardware Reference Manual - Manual (Page 102)

82 Brocade VDX 8770-8 Hardware Reference Manual
53-1002564-04
SFP transceiver removal and replacement
5
FIGURE 27 Optical transceiver extraction tool
Removing a transceiver
For the following procedure refer to Figure 28 .
Complete the following steps to remove an SFP or SFP+ transceiver.
1. Remove any cables that are inserted into the transceiver. Use the extraction tool to open the
cable latching mechanism.
2. Using the hooked end of the tool, pull the bail (wire handle) away from its pivot point and out,
sliding the transceiver out of the switch or module.
FIGURE 28 Optical transceiver with bail open
1 SFP or SFP+ bail
!
1