Brocade VDX 8770-8 Hardware Reference Manual - Manual (Page 69)

Brocade VDX 8770-8 Hardware Reference Manual 49
53-1002564-04
Determining the status of a line card
4
Table 10 describes the line card LED indications and the recommended actions for those patterns.
TABLE 10 Line card LED descriptions
LED purpose Color Status Recommended action
Power LED No light (LED is off) Module is not powered on. Ensure that the module is firmly
seated and either the
thumbscrew is fully engaged or
the slider is pushed up and the
ejectors are fully engaged.
Steady green Module is powered on. No action required.
Status LED No light (LED is off)
Power LED steady
green. Module is operational. No action required.
No light (LED is off)
Power LED is off. No power. No action required.
Steady amber Module is faulty or module is
booting up. If module is not booting up,
ensure that the module is firmly
seated and check the status by
entering the show slot
command. If the LED remains
amber, consult the Brocade
switch supplier.
Flashing amber Module is not seated correctly. Pull the module out and reseat
it. If the LED remains amber,
replace the module.