For tcp – Brocade Multi-Service IronWare Security Configuration Guide (Supporting R05.6.00) User Manual
Page 206
188
Multi-Service IronWare Security Configuration Guide
53-1003035-02
Configuring an IPv6 ACL
4
For TCP
Syntax: [no] ipv6 access-list acl name
Syntax: [no] permit | deny [ vlan vlan-id] tcp
ipv6-source-prefix/prefix-length | any | host source-ipv6_address [tcp-udp-operator
[source-port-number]]
ipv6-destination-prefix/prefix-length | any | host ipv6-destination-address
[[tcp-udp-operator [source-port-number]]
[ipv6-operator [value]] [tcp-operator [value]]
[copy-sflow] | [drop-precedence dp-value] | [drop-precedence-force dp-value] |
[dscp dscp-value] | [dscp-marking dscp-value] | [eq | gt | lt | neq | range
port-number] | [established] | [mirror]| [priority-force ] | [sequence num] | [syn]
Syntax: [no] [sequence num] permit | deny [ vlan vlan-id] tcp
ipv6-source-prefix/prefix-length | any | host source-ipv6_address [tcp-udp-operator
[source-port-number]]
ipv6-destination-prefix/prefix-length | any | host ipv6-destination-address
[[tcp-udp-operator [source-port-number]]
[ipv6-operator [value]] [tcp-operator [value]]
[copy-sflow] | [drop-precedence dp-value] | [drop-precedence-force dp-value] |
[dscp dscp-value] | [dscp-marking dscp-value] | [eq | gt | lt | neq | range
port-number] | [established] | [mirror]| [priority-force ] | [syn]
Syntax: regenerate-seq-num [num]