Brocade ICX 6450 Stackable Switches Hardware Installation Guide - Manual (Page 16)

Network and management interfaces
Each ICX 6430 and ICX 6450 includes the following management interfaces, and a system reset
button on the front panel of the device:
• Console management interface (RJ45 serial port)
• Out-of-band management interface (RJ45 port)
• Reset button
These RJ45 management ports are located together in the middle of the front panel on 24-port
models, and on the left side of the front panel on 48-port models.
FIGURE 13 Management interfaces and slot locations on 24-port models
1. Console port
2. Slot 2 (SFP and SFP + uplink or stacking ports)
3. Out-of-band management port
4. Slot 1 (10/100/1000 Mbps ports)
FIGURE 14 Management interfaces and slot locations on 48-port models
1. Console port
2. Slot 2 (SFP and SFP + uplink or stacking ports)
3. Out-of-band management port
4. Slot 1 (10/100/1000 Mbps ports
Console management interface
The console management interface is an RJ45 serial port that allows you to configure and manage the
device using a third-party terminal emulation application from a directly connected PC.
Network and management interfaces
14 Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
53-1003079-01